MURALO CO INC -- QUIK-TRED ACRYLIC LATEX FLOOR & PATIO PAINT  -- 8010-00N012012
<pre>=====================  Product Identification  =====================

Product ID:QUIK-TRED ACRYLIC LATEX FLOOR & PATIO PAINT
MSDS Date:01/10/1986
FSC:8010
NIIN:00N012012
=== Responsible Party ===
Company Name:MURALO CO INC
Address:148 EAST 5TH ST
City:BAYONNE
State:NJ
ZIP:07002
Country:US
Info Phone Num:201-437-0770
Emergency Phone Num:201-437-0770
CAGE:MURAL
=== Contractor Identification ===
Company Name:MURALO CO INC
Address:148 EAST 5TH ST
City:BAYTONE
State:NJ
ZIP:07002
Country:US
Phone:201-437-0770
CAGE:MURAL
Company Name:THE MUROLO CO INC
Address:148 E 5TH ST
Box:City:BAYONNE
State:NJ
ZIP:07002
Country:US
Phone:201-437-0770
CAGE:91953

=============  Composition/Information on Ingredients  =============

Ingred Name:PHENYLMERCURIC ACETATE  (SARA III)
CAS:62-38-4
RTECS #:OV6475000
Fraction by Wt: .01%
OSHA PEL:0.1 MG HG/M3;CEIL;S
ACGIH TLV:0.01 MG HG/M3; 9192
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:AMMONIUM HYDROXIDE	(SARA III)
CAS:1336-21-6
RTECS #:BQ9625000
Fraction by Wt: .60%
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:HYPERSENSITIVE INDIVIDUALS MAY
    EXPERIENCE SOME SKIN SENSITIZATION OR IRRITATION. CHRONIC: NONE
    KNOWN
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE KNOWN

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR 15
    MIN.GET MD. SKIN:WASH AFFECTED AREAS WITH SOAP AND WATER. GET MD IF
    IRRITATION PERSISTS.INGEST: DRINK 1-2 GLASSES OF WATER TO DILUTE.
    DO NOT  INDUCE VOMITING.GET MD IMMED. INHAL: REMOVE TO FRESH AIR .

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE DUE TO
    BUILD UP OF STEAM PRESSURE WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE ABSORBENT MATERIAL SUCH AS SAND TO PICK UP
    EXCESS, WASH AREA  WITH SOAP AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE CONTAINERS BETWEEN 40 AND
    100F.PROTECT FROM FREEZING.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED.
Ventilation:OPEN WINDOWS. CONSULT LOCAL/SAFETY HEALTH AUTHORITIES IF
    ADDITIONAL GUIDANCE IS NEEDED.
Protective Gloves:NONE REQUIRED
Eye Protection:CHEMICAL WORKERS GOGGLES.
Other Protective Equipment:FULL LENGTH CLOTHING TO AVOID PROLONGED &
    REPEATED CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:212F(WATER)
Vapor Pres:SEE INGRED
Vapor Density:>AIR
Spec Gravity:1.25
Evaporation Rate &amp; Reference:<ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:60.9

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE,AND
    LOCAL REGULATIONS.BEFORE ATTEMPTING CLEAN-UP, REFER TO HAZARD
    CAUTION INFO THROUGHOUT.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.