MINNESOTA MINING & MFG CO PRINTING & PUBLISHG DIV -- R SCRATCH REMOVER  -- 6850-01-090-6556
<pre>=====================  Product Identification  =====================

Product ID:R SCRATCH REMOVER
MSDS Date:02/14/1991
FSC:6850
NIIN:01-090-6556
=== Responsible Party ===
Company Name:MINNESOTA MINING & MFG CO PRINTING & PUBLISHG DIV
Address:3M CENTER
City:ST. PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110(75)/MSDS 612-731-6619
Emergency Phone Num:612-733-1110
CAGE:76381
=== Contractor Identification ===
Company Name:IMATION CORP COLOR TECHNOLOGIES DIV
Address:1 IMATION PL
Box:City:SAINT PAUL
State:MN
ZIP:55128-3421
Country:US
Phone:651-704-4827
CAGE:28174
Company Name:MINNESOTA MINING AND  MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381

=============  Composition/Information on Ingredients  =============

Ingred Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 20-30%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

Ingred Name:SODIUM SILICATE
CAS:6834-92-0
RTECS #:VV9275000
Fraction by Wt: 5-10%
OSHA PEL:100 PPM; ZIA
ACGIH TLV:100 PPM; 8889

Ingred Name:POTASSIUM HYDROXIDE  (SARA III)
CAS:1310-58-3
RTECS #:TT2100000
Fraction by Wt: 1-5%
OSHA PEL:C, 2 MG/M3
ACGIH TLV:C 2 MG/M3; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 50-60%
OSHA PEL:C,2 MG/CUM; ZIA
ACGIH TLV:C,2 MG/CUM; 8889

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE GIVEN
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:IRRITANT, CORROSIVE TO BODY TISSUE ON
    PROLONGED EXPOSURE; CNS & KIDNEY EFFECTS.
Effects of Overexposure:EYE: MOD-SEVERE IRRITATION, BURNS POSSIBLE,
    SKIN: IRRITATION, MILD BURNS, NECROSIS POSSIBLE INHALATION:
    IRRITATION OF URT, KIDNEY & CNS IMPAIRMENT, HEADACHE, DIZZINESS,
    NAUSEA, VOMITING, UNCONSCI.
Medical Cond Aggravated by Exposure:ANY PREEXISTING ALLERGY SENSITIVITY
    OR ORGAN OYSFUNCTION.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH 15 MUN WITH AMPLE WATER. SKIN: FLUSH 15 MIN W/AMPLE
    WATER INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN OR AIR RESP AS
    REQUIRED, INGESTION:DO NOT INDUCE VOMITING. IF CONSCIOUS GIVE TWO
    GLASSE S WATER OR MILK. CALL PHYSICIAN PROMPTLYIN ALL EXPOSURES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:95.0F,35.0C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:OBSERVE ALL PRECAUTIONS GIVEN. REMOVE EXCESS
    HEAT & IGNITION SOURCES. COLLECT SPILL USING ABSORBENT MATERIAL,
    PLACE IN CLOSABLE CONTAINER. WASHDOWN SPILL AREA W/DETERGENT
    SOLUTION.
Neutralizing Agent:MILD ACID, SULFURIC,HYDROCHLORIC, AS REQUIRED.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS CLOSED. USED ONLY WITH
    ADEQUATE VENTILATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE
Ventilation:GENERAL MECHANICAL.
Protective Gloves:NATURAL RUBBER
Eye Protection:CHEMICAL SAFETY GOGGLES.
Other Protective Equipment:NONE
Work Hygienic Practices:AVOID EYE-SKIN CONTACT. DO NOT INHALE OR
    INGEST. REMOVE CONTAMINATED CLOTHING & LAUNDER BEFORE REUSE.
Supplemental Safety and Health
UPDATE PER 3M MSDS DOC#10-3213-5 DATED 11OCT88. 3M GENERIC ID# IS
    77-98XX-XXXX-X.

==================  Physical/Chemical Properties  ==================

HCC:F7
Boiling Pt:B.P. Text:203F/95C
Vapor Pres:<17.5
Spec Gravity:0.96
pH:12.5
Viscosity:488 CPS
Solubility in Water:EMULSION
Appearance and Odor:MILKY WHITE LIQUID, SLIGHT SOLVENT ODOR.
Percent Volatiles by Volume:90

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZERS
Stability Condition to Avoid:EXCESS HEAT AND IGNITION SOURCES
Hazardous Decomposition Products:CARBON OXIDES, SILICA DUSTS, KOH
    MISTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL OR INCINERATE IAW ALL LAWS & REGS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.