VAN SON HOLLAND INK CORP -- VANSON RUBBER BASE PLUS INKS -- 7510-00F031513
===================== Product Identification ===================== Product ID:VANSON RUBBER BASE PLUS INKS MSDS Date:05/01/1992 FSC:7510 NIIN:00F031513 === Responsible Party === Company Name:VAN SON HOLLAND INK CORP Address:92 UNION ST City:MINEOLA State:NY ZIP:11501-3428 Country:US Info Phone Num:516-294-8811 Emergency Phone Num:516-294-8811 CAGE:55269 === Contractor Identification === Company Name:VAN SON HOLLAND INK CORP Address:92 UNION STREET City:MINEOLA State:NY ZIP:11501-3428 Country:US Phone:516-294-8811 CAGE:55269 ============= Composition/Information on Ingredients ============= Ingred Name:WAX (POLYMERIC BLENDS) Fraction by Wt: 5-10% Ingred Name:HYDROTREATED MIDDLE PETROLEUM DISTILLATE, PETROLEUM SOLVENT CAS:64742-46-7 RTECS #:JN9379645 Fraction by Wt: 10-30% Ingred Name:RESIN Fraction by Wt: 24-40% Other REC Limits:10 MG/CUM (DUST) Ingred Name:VEGETABLE OIL CAS:68956-68-3 RTECS #:YX1850000 Fraction by Wt: 15-30% Ingred Name:PIGMENT Fraction by Wt: 15-25% Other REC Limits:10 MG/CUM (DUST) Ingred Name:VOL ORGANIC CMPD: 100-200 GRAMS/LITER RTECS #:9999999VO ===================== Hazards Identification ===================== Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: MINOR IRRITATION. Explanation of Carcinogenicity:NONE Medical Cond Aggravated by Exposure:PERSONS W/DERMATITIS ======================= First Aid Measures ======================= First Aid:EYES: FLUSH W/WATER. SKIN: WASH W/SOAP & WATER. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Flash Point Method:CC Flash Point:250F Extinguishing Media:CO2, FOAM, DRY CHEMICAL Fire Fighting Procedures:USE WATER TO KEEP CONTAINERS COOL. WATER WILL NOT BE EFFECTIVE IN FIGHTING FIRES. Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHILE BURNING. ================== Accidental Release Measures ================== Spill Release Procedures:WIPE UP. DISPOSE OF WIPES IN APPROVED WASTE CONTAINERS. IF PETROLEUM HYDROCARBON IS USED PROVIDE SUFFICIENT VENTILATION. ====================== Handling and Storage ====================== Handling and Storage Precautions:AVOID STORAGE IN HOT AREAS. KEEP CONTAINERS CLOSED WHEN NOT IN USE. READ & FOLLOW LABEL PRECAUTIONS. DON'T REUSE CONTAINERS. Other Precautions:FOR COMMERCIAL/INDUSTRIAL USE ONLY. KEEP OUT OF REACH OF CHILDREN. ============= Exposure Controls/Personal Protection ============= Ventilation:GENERAL IS SUFFICIENT Protective Gloves:AS REQUIRED Supplemental Safety and Health ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:500-590F Vapor Density:>1 Spec Gravity:>1 Evaporation Rate & Reference:(BU AC = 1): <1 Solubility in Water:INSOLUBLE Appearance and Odor:COLORED PASTE, W/OILY ODOR Percent Volatiles by Volume:10-30 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES Stability Condition to Avoid:EXCESS HEAT ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.