FOAMEX -- POLYURETHANE FOAM  -- 9330-00N069802
<pre>=====================  Product Identification  =====================

Product ID:POLYURETHANE FOAM
MSDS Date:12/01/1991
FSC:9330
NIIN:00N069802
=== Responsible Party ===
Company Name:FOAMEX
Address:1500 E SECOND STREET
City:EDDYSTONE
State:PA
ZIP:19013
Country:US
Info Phone Num:215-499-7824
Emergency Phone Num:215-499-7824
CAGE:JO316
=== Contractor Identification ===
Company Name:FOAMEX
Address:1500 E SECOND STREET
Box:City:EDDYSTONE
State:PA
ZIP:19013
Country:US
Phone:215-499-7824
CAGE:JO316
Company Name:SCOTT PAPER CO
Address:1500 E 2ND STREET
Box:City:EDDYSTONE
State:PA
ZIP:19013-6728
Country:US
Phone:215-499-7824
CAGE:1M781

=============  Composition/Information on Ingredients  =============

Ingred Name:NONE - MATERIAL IS FULL CROSS-LIKED REACTION PRODUCT OF
    INGREDIENTS 2 - 7.
RTECS #:9999999ZZ

Ingred Name:POLYHYDROXY POLYOL
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:BENZENE, 2,4-DIISOCYANATO-1-METHYL-; (TOLUENE
    DI-ISOCYANATE)
CAS:584-84-9
RTECS #:CZ6300000
OSHA PEL:N/K 
ACGIH TLV:N/K 
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:CATALYSTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SURFACTANTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PIGMENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHAL: DUST FROM CUTTING CAN BE
    NUISANCE DUST. SKIN/EYES: CAN CAUSE MECHANICAL IRRITATION.
    TEMPERATURES OVER 350F MAY GENERATE TOXIC OR RESPIRATORY IRRITANTS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE TO FRESH AIR. CONSULT MD IF RESPIRATORY
    PROBLEMS PERSIST; EYE IRRIT FROM POWDER - WASH WELL. SKIN: FLUSH
    W/COPIOUS AMOUNTS OF WATER. SEE MD. EYE: FLUSH W/POTABLE WATER FOR
    AT LEAST  15 MINUTES. SEE MD. INGEST: CALLMD IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:>500F,>260C
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:DRY CHEMICAL, WATER, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:FOAM CAN EMIT COMBUSTIBLE GASES MAKING
    FLASHBACK POSSIBLE. FOAM WILL BURN W/HIGH HEAT, EVOLUTION OF BLACK
    SMOKE, FLAMING DROPLETS AND TOXIC PRODUCTS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SWEEP UP - NO SPECIAL STEPS NEEDED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:LARGE QUANTITIES SHOULD BE STORED IN
    WELL SPRINKLERED AREAS AWAY FROM HEAT OR OPEN FLAMES.
Other Precautions:NOTIFY LOCAL FIRE COMPANIES OF PRESENCE OF LARGE QTYS
    OF FOAM.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD ORGANIC VAPOR CARTRIDGES;
    DUSTS USE DUST MASK.
Ventilation:LOCAL EXHAUST NEEDED FOR HOT WIRE CUTTING OR FLAME
    LAMINATION.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA. DUST COLLECTION EQUIPMENT DURING BUFFING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MELTING PT: DECOMPOSES 350F - 375F.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:SUPDAT
Vapor Pres:NONE
Vapor Density:NONE
Evaporation Rate &amp; Reference:NONE
Solubility in Water:INSOLUBLE
Appearance and Odor:UNIFORM CELLULAR STRUCTURE W/SLIGHT, CHARACTERISTIC
    ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OZIDIZING ACIDS-WILL DEGRADE.
Stability Condition to Avoid:HIGH TEMPERATURES, OPEN FLAMES, STRONG
    OXIDIZERS.
Hazardous Decomposition Products:CARBON MONOXIDE, OXIDES OF NITROGEN,
    HYDROGEN CYANAIDE, ACRYLONITRILE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL OR INCINERATE. DISPOSE OF IN ACCORDANCE
    W/LOCAL, STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.