CHEMSCOPE CORPORATION -- METAL POLISH  -- 7930-00-868-4736
<pre>=====================  Product Identification  =====================

Product ID:METAL POLISH
MSDS Date:03/16/1987
FSC:7930
NIIN:00-868-4736
=== Responsible Party ===
Company Name:CHEMSCOPE CORPORATION
Address:3200 E. RANDOL MILL RD.
City:ARLINGTON
State:TX
ZIP:76011
Country:US
Info Phone Num:817-640-5658
Emergency Phone Num:817-640-5658
Preparer's Name:ROGER N. COTMAN
CAGE:DO131
=== Contractor Identification ===
Company Name:CHEMSCOPE CORP
Address:3200 E RANDOL MILL RD
Box:City:ARLINGTON
State:TX
ZIP:76011-6838
Country:US
CAGE:53984
Company Name:CHEMSCOPE CORPORATION
Address:3200 E. RANDOL MILL ROAD
City:ARLINGTON
State:TX
ZIP:76011
Phone:817-640-5653
CAGE:DO131

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE)  (SARA III)
CAS:71-55-6
RTECS #:KJ2975000
Fraction by Wt: 97.5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:350 PPM/450 STEL
ACGIH TLV:350 PPM/450STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Effects of Overexposure:SKIN & EYE CONTACT MAY CAUSE IRRITATION.
    PROLONGED INHALATION MAY CAUSE DIZZINESS AND NAUSEA.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE PATIENT TO FRESH AIR, TREAT AS CHLORINATED
    HYDROCARBON OVEREXPOSURE. SKIN CONTACT: WASH THOROUGHLY WITH SOAP
    AND WATER. EYE CONTACT: FLUSH EYES WITH PLENTY OF WATER, CONTACT
    PHYSICI AN.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Lower Limits:7.5
Upper Limits:15.0
Extinguishing Media:WATER, FOAM, DRY CHEMICAL, CARBON DIOXIDE (CO2)
Unusual Fire/Explosion Hazard:FIREFIGHTERS SHOULD WEAR SELF CONTAINED
    BREATHING APPARATUS DUE TO THERMAL DECOMPOSITION PRODUCTS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:COLLECT SPILL WITH ABSORBENT MATERIAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE CONTAINERS IN A COOL, DRY WELL
    VENTILATED AREA.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED IF USED WITH ADEQUATE VENTILATION
Ventilation:LOCAL EXHAUST
Protective Gloves:SOLVENT RESISTANT
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:162F,72C
Vapor Pres:100
Vapor Density:4.6
Spec Gravity:1.30
Evaporation Rate &amp; Reference:0.4 (ETHER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, COLORLESS, SWEET SMELLING LIQUID
Percent Volatiles by Volume:90.5
Corrosion Rate:NON-CORR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES OXIDIZERS, REACTIVE METALS
Stability Condition to Avoid:OPEN FLAME, HOT SURFACES WHICH CAN CAUSE
    THERMAL DECOMPOSITION.
Hazardous Decomposition Products:HYDROGEN CHLORIDE, PHOSGENE (SMALL
    AMOUNTS)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL LAWS FOR CHLORINATED HYDROCARBONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.