FIBRE GLASS-EVERCOAT CO, INC -- SPRAY UNDER COATING  -- 8010-00N056578
<pre>=====================  Product Identification  =====================

Product ID:SPRAY UNDER COATING
MSDS Date:09/01/1988
FSC:8010
NIIN:00N056578
=== Responsible Party ===
Company Name:FIBRE GLASS-EVERCOAT CO, INC
Address:6600 CORNELL RD
City:CINCINNATI
State:OH
ZIP:45242
Country:US
Info Phone Num:800-729-7600
Emergency Phone Num:800-729-7600
CAGE:18731
=== Contractor Identification ===
Company Name:FIBRE GLASS-EVERCOAT CO INC
Address:6600 CORNELL ROAD
Box:City:CINCINNATI
State:OH
ZIP:45242
Country:US
Phone:513-489-7600
CAGE:18731

=============  Composition/Information on Ingredients  =============

Ingred Name:ASPHALT
CAS:8052-42-4
RTECS #:CI9900000
Fraction by Wt: 53%
OSHA PEL:N/K 
ACGIH TLV:5 MG/M3; (FUME)

Ingred Name:MINERAL SPIRITS(MFR INVALID CAS#: 8056-41-3)
Fraction by Wt: 27%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PROPANE;(PROPELLENT)(MFR INVALID CAS#: 47-98-6).
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 20%
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT

Ingred Name:VOLATILE ORGANIC COMPOUNDS: 451.
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: PROLONGED/FREQUENT CONTACT MAY
    CAUSE DEFATTING, DRYNESS W/IRRITATION & POSSIBLE IRRITATION.
    STYRENE MAY BE ABSORBED THROUGH SKIN IN TOXIC AMOUNTS. EYES: MAY
    CAUSE TEARING & IRRITATION. INHAL: VA PORS MAY CAUSE NOSE THROAT &
    RESP TRACTIRRIT. HIGH CONC MAY CAUSE HEADACHE & NAUSEA. REPEATED
    HIGH (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CONCENTRATION EXPOSURE MAY CAUSE
    LIVER & KIDNEY DMG. INGEST: MAY CAUSE GI DISTRUBANCES, PAIN &
    DISCOMFORT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/WATER FOR AT LEAST
    15 MINUTES. GET MED ATTN. INHAL: REMOVE VICTIM FROM EXPOSURE. IF
    VICTIM IS UNCON GIVE ARTF RESP/OXYGEN AS NEEDED. GET MED ATTN.
    INGEST: DO N OT INDUCE VOMITING. GET MEDICAL ATTN IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:<120F,<49C
Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL OR CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES SUCH AS IN A
    FIRE, POLYMERIZATION MAY TAKE PLACE, IF CONTAINED, VIOLENT RUPTURE
    MAY RESULT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. ABSORB WITH EARTH, SAND OR
    VERMICULITE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS CLOSED. STORE AWAY
    FROM HEAT & OPEN FLAME. STORE AT TEMPERATURE BELOW 120F.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF TLV IS EXCEEDED A NIOSH/MSHA JOINTLY APPROVED
    SCBA W/FULL FACE SHIELD IS ADVISED.
Ventilation:ANY COMBINATION OF LOCAL &/GENERAL DILUTION VENTILATION TO
    MAINTAIN EXPOSURE TO LESS THAN TLV.
Protective Gloves:RUBBER/SOLVENT RESISTANT.
Eye Protection:ANSI APPROVED CHEM SAFETY GOGGLES 
Other Protective Equipment:SOLVENT RESISTANT APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VP: <140 PSI @ 130F.

==================  Physical/Chemical Properties  ==================

Vapor Pres:SUPP DATA
Vapor Density:>1
Solubility in Water:NIL
Appearance and Odor:BLACK SOLVENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS CHROMIC ACID, HYDROGEN PEROXIDE, &
    BROMINE.
Stability Condition to Avoid:HEAT & OPEN FLAMES.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE AS SOLID WASTE IN ACCORDANCE WITH LOCAL,
    STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.