TITAN CORP -- FOAM & FILL  -- 6810-00N062306
<pre>=====================  Product Identification  =====================

Product ID:FOAM & FILL
MSDS Date:04/01/1992
FSC:6810
NIIN:00N062306
=== Responsible Party ===
Company Name:TITAN CORP
Address:5629 208TH ST SW
City:LYNNWOOD
State:WA
ZIP:98036
Country:US
Info Phone Num:206-775-2582
Emergency Phone Num:206-775-2582
CAGE:4F637
=== Contractor Identification ===
Company Name:TITAN CORP
Address:5629 208TH ST SW
Box:City:LYNNWOOD
State:WA
ZIP:98036
Country:US
Phone:206-775-2582
CAGE:4F637

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYMERIC ALCOHOL
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:OVEREXPOSURE POSSIBLY REDUCES
    THE OXYGEN SUPPLY BELOW THE LEVEL NECESSARY TO SUPPORT LIFE.
    CHRONIC:NONE MENTIONED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE MENTIONED.

=======================  First Aid Measures  =======================

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
    SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:FLUSH AT ONCE
    W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. SKIN:SEE MD IF
    IRRITATION DEV ELOPS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:425F,218C
Extinguishing Media:WATER, CO*2, CHEMICAL FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE MENTIONED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID BREATHING FUMES. USE ADEQUATE FRESH AIR
    SUPPLY, COVER SPILL W/ANY ABSORBENT COMPOUND MATERIAL & ALLOW TO
    SOAK UP SPILLAGE. DISPOSE IN CHEMICAL LAND FILL AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE ADEQUATE VENTILATION. 75F OR ABOVE
    - RELIEVE PRESSURE SLOWLY WHEN OPENING CONTAINER. RESEAL CONTAINER
    WELL.
Other Precautions:THIS MATERIAL IS HYGROSCOPIC. CONTAINERS SHOULD BE
    TIGHTLY SEALED TO PREVENT MOISTURE CONTAMINATION. DO NOT EXPOSE TO
    HIGH TEMPERATURES FOR ANY LENGTH OF TIME.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:FRESH AIR SUPPLY RECOMMENDED, IT IS RECOMMENDED
    THAT A NIOSH/MSHA APPROVED AIR PURIFYING RESPIRATOR W/ORGANIC
    FILTER CARTRIDGES BE WORN.
Ventilation:LOCAL EXHAUST: WILL KEEP TLV BELOW MINIMUM IN MOST CASES.
Protective Gloves:PLASTIC OR RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EMERG EYE WASH AND DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .  WEAR RECOMMENDED PROTECTIVE CLOTHING.
Work Hygienic Practices:REMOVE CLOTHING THAT IS SATURATED W/MATERIAL,
    WASH EXPOSED AREAS W/SOAP & WATER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:77.0F,25.0C
Vapor Density:5.84
Spec Gravity:1.18 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BROWN LIQUID; SLIGHTLY AROMATIC ODOR.
Percent Volatiles by Volume:25

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:NONE MENTIONED.
Conditions to Avoid Polymerization:ISOCYANTES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS . WASH AREA W/DETERGENT & WATER, FLUSH INTO CHEMICAL
    SEWER. DISPOSE OF CONTAINERS BY INCINERATING IN APPROVED
    INCINERATOR.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.