HILLYARD INDUSTRIES -- CONTENDER FINISH  -- 6850-00F013575
<pre>=====================  Product Identification  =====================

Product ID:CONTENDER FINISH
MSDS Date:03/03/1990
FSC:6850
NIIN:00F013575
Kit Part:Y
=== Responsible Party ===
Company Name:HILLYARD INDUSTRIES
Address:302 N 4TH
Box:909
City:ST JOSEPH
State:MO
ZIP:64502
Country:US
Info Phone Num:816-233-1321 EXT 303
Emergency Phone Num:816-233-1321
CAGE:EO617
=== Contractor Identification ===
Company Name:HILLYARD INDUSTRIES
Address:302 NORTH FOURTH STREET
Box:City:ST JOSEPH
State:MO
ZIP:64501
Country:US
Phone:816-233-1321 (EXT 2303)
CAGE:28745
Company Name:HILLYARD INDUSTRIES
Address:302 N 4TH
Box:909
City:ST JOSEPH
State:MO
ZIP:64502
Country:US
Phone:816-233-1321 EXT 303
CAGE:EO617

=============  Composition/Information on Ingredients  =============

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000

Ingred Name:ALIPHATIC POLYGLYCIDYL ETHER      *92-2*
CAS:26142-30-3

Ingred Name:BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820, 
    ARALDITE 6004, 4,4'-ISOPROPYLIDENEDIPHENOL-EPICHLOROHYDRIN
CAS:25068-38-6
RTECS #:KD4380000

Ingred Name:BUTYRIC ACID LACTONE, TETRAHYDRO-2-FURANONE, BLO	       
    BUTYRYLACTONE
CAS:96-48-0
RTECS #:LU3500000

Ingred Name:DIIPOXIDE PYROL

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: SENSITIZATION.
Explanation of Carcinogenicity:NONE

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS.
    INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE VOMITING.
    OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:NONE
Extinguishing Media:CO2, DRY CHEMICAL, FOG, WATER SPRAY
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS W/FULL
    FACEPIECE OPERATED IN PRESSURE DEMAND OR OTHER PRESSURE MODE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE SPILL AREA & ADD ABSORBENT EARTH, SAND OR
    SAWDUST. KEEP OUT OF SEWERS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINES CLOSED TIGHTLY WHEN NOT
    IN USE. STORE IN COOL, WELL VENTILATED AREAS AWAY FROM HEAT & OUT
    OF DIRECT SUNLIGHT. PROTECT FROM FREEZING.
Other Precautions:AVOID BREATHING OF VAPOR/SPRAY MIST. AVOID SKIN
    CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE MESA/NIOSH APPROVED RESPIRATOR.
Ventilation:ADEQUATE
Protective Gloves:AS REQUIRED
Eye Protection:AS REQUIRED
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM.
Supplemental Safety and Health
PHYSICAL DATE INFORMATION FOR MIXTURE (PART A & B) IS AS FOLLOWS:
    BOILING POINT (203F), SPECIFIC GRAVITY (1.05), VAPOR PRESSURE
    (17.22), PERCENT VOLATILE BY VOLUME (72.45), VAPOR DENSITY (0.653),
    EVAP ORATION RATE (SLOWER THAN ETHER), SOLUBILITY IN WATER
    (APPRECIABLE), APPEARANCE/ODOR: WHITE, OPAQUE LIQUID.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:204F
Vapor Pres:17.36
Vapor Density:0.796
Spec Gravity:1.08
Evaporation Rate &amp; Reference:(ETHYL ETHER = 1): <1
Solubility in Water:APPRECIABLE
Appearance and Odor:WHITE EMULSION
Percent Volatiles by Volume:51.57

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS
Stability Condition to Avoid:FIRE, EXCESS HEAT, FREEZING, DIRECT
    SUNLIGHT
Hazardous Decomposition Products:CO, CO2 & PRODUCTS OF COMBUSTION OF
    ORGANIC MATERIAL

====================  Disposal Considerations  ====================

Waste Disposal Methods:COLLECT ABSORBENT/SPILLED MIXTURE INTO METAL
    CONTAINERS. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL
    REGULATIONS. INCINERATE IN APPROVED FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.